Basic Knowledge of Double-Wall Tanks

Since the promulgation and implementation of documents such as the “Design and Construction Specifications for Automobile Gas Stations” in 2014, the popularity of double-wall tanks in China has entered a rapid period of development. This is not only to comply with relevant national regulations, making it an inevitable trend of development and progress.

Double-Wall Tanks

Core Technologies of Double-Wall Tanks

The “through gap”

Inner and outer layers of a double-wall tank. This gap is not designed arbitrarily. For example, for a 30-cubic-meter tank, the gap volume must be between 60 and 600 liters, with a minimum gap of 1 mm and a maximum of 10 mm. If the gap is too small, leaking oil will be “stuck” and undetectable, thus negating the safety advantages of double-wall tanks in leak detection.

Corrosion Resistance and Leak Detection

In terms of corrosion resistance, double-wall tanks made of FRP offer a 30-year warranty, making them more corrosion-resistant than conventional steel tanks. Regarding leak detection safety, double-wall tanks must be equipped with a leak detection system.

SF Type Oil Tank

How to Choose the Right Double-Wall Oil Tank?

Don’t blindly pursue the “latest and best”

There are different types of double-wall oil tanks. For example, while the FF type and a long lifespan, it’s more expensive than the SF type (with an inner steel layer and an outer FRP layer). If the gas station isn’t located in a water source protection zone, they aren’t necessary in all locations. For example, a Class II liquid-based system is a good choice for ordinary gas stations. It’s low-cost, less prone to false alarms, and even if the detected liquid leaks, it won’t pollute the environment.

Don’t just rely on “paper data”

SF-type oil tanks can be buried directly under driveways and even provide test reports to support this claim. However, these reports may only confirm that they can “bear weight without deformation” and don’t guarantee that their performance will be flawless. For a truly “direct burial” system to be viable. The outer layer of the tank must be reinforced, not just the inner layer. The gap between the two layers is firmly supported.

Ensure product quality

Don’t buy oil tanks that appear to be high-quality when submitted for inspection, but are actually substandard. Although there are national standards for double-walled tanks, high-quality materials (such as high-quality resin) are used when submitting for inspection, but cheaper, inferior materials are used in production. Tanks made of inferior materials may not be noticeable immediately, but over time, they will delaminate and crack. Furthermore, buried tanks are difficult to repair if damaged.

Automatic Tank Gauging System

Update cookies preferences
WhatsApp

Get a Quick Quote!

x

    Get a Quick Quote!

    x