Coriolis Mass Flow Transmitters F210
The Mass Flow Meter consists of a Mass Flow sensor and flow transmitters.
The mass flowmeter is used to measure the mass flow of fluid, its principle is to use the time and speed of the fluid through the measuring tube to calculate the mass flow, with high accuracy, good stability, and so on.
The transmitter is used to convert the signal measured by the mass flowmeter into the standard electrical signal output, and to process, enlarge and isolate the signal for the convenience of signal transmission, processing, and control.
It is installed in the explosion-proof box, even in the event of accidents, but also to ensure safety.
The main function of a mass flow transmitter is as follows:
Measuring the mass flow of fluid
A mass flowmeter transmitter can accurately measure the mass flow of fluid, without the influence of fluid temperature, pressure, density and other parameters.
Output standard electrical signal
The mass flowmeter transmitter converts the signal measured by the mass flowmeter into the standard electrical signal output, which is convenient for signal transmission, processing and control.
Signal Processing and amplification
Mass flowmeter transmitters can be measured by the mass flowmeter signal processing and amplification, improving the accuracy and stability of the signal.
Provide isolation protection
Mass flowmeter transmitters can provide isolation protection against measurement signal interference or external environmental interference.
Programmable Control
mass flowmeter transmitter can be programmed to control, according to the need for signal output mode, alarm settings, linearization, and other operations, easy to use and manage.
Therefore, the mass flow transmitter is widely used in industrial production and process control, especially in the field of precise measurement and control of fluid mass flow.
Flow Transmitters F210 Appearance
Flow Transmitters F210 Size
]
Use of CNG dispenser
Technical performances |
Model no. | F210 |
Temp. rating | -20°C~+50°C |
RH | ≤95%, non condensed |
Atmospheric pressure | 86~106KPa |
Operating voltage | AC85~265V, DC12~28V |
Communication port | RS485 Modbus RTU |
Ex-proof grade | Exd[ib]IIBT4Gb |