How to prevent hidden dangers at gas stations?

As the New Year is approaching, the traffic is busy. While gas station staff are doing their daily refueling work, they are also experiencing peak passenger flow, forgetting about fire safety issues.
To prevent fire hazards, not only do gas station staff need to standardize operations, but It is also necessary to promptly stop customers’ dangerous behaviors, Regular inspections, and regular drills.

Regular fire extinguisher inspection at gas stations

1. Fire equipment, Normally valid

Fire hydrants, fire extinguishers, fire extinguishing sand, and other fire-fighting supplies are indispensable guarantees. However, if such items are not used normally, they can easily cause failure problems over time, such as fire hydrant switch failure, no water discharge, fire extinguisher pressure reduction and failure, etc. The consequences will be dire if it cannot be used normally in an emergency.
Therefore, it is important to remember to inspect fire-fighting supplies, which can be combined with fire drills, and expired supplies should be eliminated and replenished immediately.

Gas station fire drill

2. Anti-open flame and anti-static

All refueling machines and refueling islands under the canopy, tank areas where oil products are stored, business rooms and ancillary facilities, power distribution rooms, or generator rooms are flammable and explosive areas, and fire and smoking bans must be strictly implemented.
In terms of anti-static, oil tanks, oil pipelines, and tanker equipment should be grounded and bridged. It is strictly forbidden to use plastic buckets to fill light oil products. The sampler’s lifting rope must be made of pure cotton and added with special static conductive thin wires. When unloading oil from a tank truck, a special grounding device must be used and good grounding must be maintained.

3. Focus on prevention in three links

During the three steps of unloading oil, measuring oil, and cleaning the tank, the oil will be exposed to the air. If the operating procedures are violated during operation and the oil or oil vapor comes into contact with the fire source in the air, an explosion and combustion accident will occur. Therefore, professionals must carry it out according to safety regulations, and there must be no luck or contempt.

Update cookies preferences

Get a Quick Quote!

x

    Get a Quick Quote!

    x