A mobile CNG refueling station requires only a gas cylinder bank, a liquid pump, and a simple refueling machine.

After the CNG transport vehicle arrives at the station site (which can be a temporary refueling point such as a plaza), the gas storage equipment is removed and secured. A hydraulic device in the middle of the vehicle frame lifts one end of the gas cylinder bank. Using its built-in oil pump, lubricating oil is forced into the bottom of the gas cylinder bank, pushing an internal piston to maintain a natural gas pressure of 20MPa at the top. A simple refueling machine (single-pipe dispensing, no dispensing sequence control panel) is connected via an end control valve and interface. The refueling machine can even be mounted on the trailer, eliminating the need for additional connections and enabling CNG refueling for vehicles.

The entire system consists of an in-station high-pressure plunger pump unit, a PLC control system, a dedicated CNG tube bundle trailer, and a CNG refueling machine. Unlike ordinary CNG tube bundle trailers, the dedicated tube bundle trailers for hydraulic push-type substations are equipped with injection valves, return valves, and pneumatic exhaust valves, and the chassis requires a tube bundle lifting mechanism. Multiple high-pressure quick-connect interfaces are included; the difference between this and ordinary tube bundle trailers is the addition of hydraulic quick-connect interfaces. The advantages of this technology are high unloading efficiency, typically reaching 92-95%, while traditional substation trailers generally cannot unload gas below 3MPa. Overall energy consumption is also superior to traditional substations.
However, the disadvantages are equally prominent. Dedicated hydraulic trailers are incompatible with ordinary trailers, and the investment is significantly higher.