Several Methods of Oil and Gas Recovery

Gas station owners all know about oil and gas recovery, but how do they recover? Let’s talk about several oil and gas recovery methods.

Oil and gas recovery device
Oil and gas recovery device

1. Adsorption method

The separation of oil and gas and air is achieved by using the adsorption force of adsorbents such as activated carbon, silica gel, or activated fiber on the oil and gas/air mixture. Oil and gas pass through adsorbents such as activated carbon, and the oil and gas components are adsorbed on the surface of the adsorbent, and then desorbed by reduced pressure or steam. The enriched oil and gas are sucked into the oil tank by a vacuum pump or liquefied by other methods; however, the adsorption force of adsorbents such as activated carbon on air is very small, and the unadsorbed tail gas is discharged through the exhaust pipe.

  • Advantages: The adsorption method can achieve a higher treatment efficiency; the emission concentration is low and can reach a very low value.
  • Disadvantages: Triphenyl easily deactivates activated carbon, and there is a secondary pollution problem after the activated carbon is deactivated.

The adsorption force of domestic activated carbon is generally only about 7%, and its life is not long. Generally, it needs to be replaced every 2 years.

2. Absorption method

The separation of oil and gas, and air is carried out according to the solubility of each component in the mixed oil and gas in the absorbent. Generally, poor oil, such as diesel, is used as an absorbent. Generally, oil and gas are contacted with the absorbent sprayed from the top of the absorption tower in countercurrent. The absorbent selectively absorbs hydrocarbon components. The unabsorbed gas is discharged through the flame arrester. The absorbent enters the vacuum desorption tank for desorption, and the oil and gas are enriched and then absorbed by the oil products.

  • Advantages: simple process and low investment cost.
  • Disadvantages: The recovery rate is too low, generally only about 80%, which cannot meet the current national standards.

The equipment occupies a large space; has high energy consumption; large absorbent consumption, which needs to be continuously replenished; the pressure drop is too large, reaching about 5000 Pa.

3. Direct combustion method

This method is to directly oxidize and burn the hydrocarbon-containing gas generated during storage and transportation, and the carbon dioxide, water, and air generated by the combustion are directly discharged as the treated purified gas. This process is only a treatment measure to control oil and gas emissions. It cannot recover oil products and has no economic benefits.

4. Membrane separation method

Using the characteristics of special polymer membranes that have preferential permeability to hydrocarbons, the oil and gas and air mixture is driven by a certain pressure, so that the oil and gas molecules are preferentially passed through the polymer membrane, while the air components are intercepted and discharged, and the enriched oil and gas are transmitted back to the oil tank or liquefied by other methods.

  • Advantages: advanced technology, relatively simple process; liquid recovered oil products can be intuitively seen.
  • Disadvantages: Membrane separation devices require steady flow and stable pressure gas.

Gas station oil and gas recovery system

 

Update cookies preferences
WhatsApp

Get a Quick Quote!

x

    Get a Quick Quote!

    x