The reason why the submersible pump does not release oil may involve multiple aspects. The following are some common reasons and their treatment methods:

1. The problem of oil
- Insufficient oil: When the oil is lower than one-third of the UMP, if the oil is not in time, it may cause the submersible pump to empty, and then cause problems such as gas blockage and affect the oil output.
2. The filter is blocked
- Filter function: The filter is an important part of the submersible pump and oil machine, which is used to prevent impurities from entering the oil road and ensure the normal operation of the equipment.
- Impact of clogging: If the filter is clogging, it will lead to a decrease in oil output, even if it is not completely out of oil.
- Solution: regular cleaning and replacement of filters, maintaining oil flow.
3. Oil pump failure
- Damage to the oil pump: There may be damage to the oil pump itself, mechanical seal failure, motor failure, etc., causing the oil to be unable to flow normally.
- Inspection and maintenance: It is necessary to inspect the oil pump and its circuit, and repair or replace it in time.
4. Electrical problems
- Power supply problem: The power supply of the oil pump is not normal, such as the power supply line being short or draining electricity, which may also cause the oil machine not to produce oil.
- Signal problem: The oil machine open signal is abnormal or the control cabinet is faulty, which may affect the start and output of the oil pump.
- Solution method: Check the quality of the power supply, check the electrical wiring, and notify the personnel of the factory.
5. Piping issues
- Pipeline: There may be problems such as precipitation, accumulation of water, etc., in the oil pipe, causing pipe blockage and affecting the normal operation of the oil machine.
- Solution: clean the pipeline, remove the accumulation of water and sediment inside the pipeline; or upgrade the pipeline, change the pipe to a wider diameter, and improve the conveying capacity.
6. Other factors
- Installation and configuration problems: Improper installation of the oil pump, the tightness of the pump seat, the loose movement of the pump, the connection of the electric pipe, and the oil pipe being too long or too loose, etc., which may affect the oil output.
- Functional element adjustment: The functional element is not used to adjust the output oil quantity, but to adjust the pressure.
- Check and adjust: Check the installation condition of the oil pump, ensure the installation specifications; adjust the functional components to ensure the normal pressure value, and make the measuring valve work normally.

To maintain the normal operation of the oil machine, it is essential to strengthen the maintenance and upkeep of the equipment during normal use, detect and eliminate equipment faults on time, and ensure the long-term reliable operation of the equipment.