Why do buses in China use CNG, while heavy trucks use LNG?

When the new energy has not yet emerged, almost all buses are gas-fired, and gas-fired buses are printed with the three letters CNG. At the same time, some heavy trucks are also gas-fired, but their bodies are printed with LNG. Both are gas-fired, why is there a division between CNG and LNG? What’s the difference between those two?

CNG bus

The difference is very simple: CNG is the abbreviation of Compressed Natural Gas (compressed Natural Gas), and LNG is the abbreviation of Liquid Natural Gas (liquefied natural gas). NG means the same, both refer to natural gas, the difference is that C refers to compressed, and L refers to liquefied.

The so-called compression is to force gaseous natural gas into a high-pressure cylinder, and the bottle is still gaseous natural gas, but the pressure is very high, generally up to 20Mpa. What is this concept? The standard air pressure of our family car tire is generally 230Kpa, and 20Mpa is equivalent to 20000Kpa, which is almost 100 times that of the family car tire pressure. Therefore, CNG’s gas tanks are internal pressure cylinder bottles, and the outside is reinforced with glass fiber winding to ensure its pressure resistance.

Taxis, family cars changed from oil to gas, and early buses used CNG. The advantage of CNG is that it is cheap and stable. The disadvantage is that the cylinder capacity is limited, the storage energy density is not high, and the driving distance is short. And it’s a little slower to fill up.

In addition, due to high pressure, the stability of CNG is a big problem, which is not a problem of bottle strength, because the pressure level of CNG cylinder can reach 30Mpa, and its working pressure is only 20Mpa, so the possibility of bottle explosion is very small. The problem is that the relatively weak parts of the bottle valve are easy to leak and cause an explosion after a collision.

LNG trucks

LNG, on the other hand, is liquefied natural gas cooled to more than 160 degrees below zero and then filled with specially insulated gas cylinders. Because of the cryogenic liquid in the cylinder, the LNG cylinder is a double hollow structure, just like the warm water bottle at home. LNG allows for higher storage densities and longer vehicle endurance. Like an ordinary semi-tractor, a full bottle of liquefied natural gas can easily run more than 1,000 kilometers.

LNG refueling operation is more complicated, because the ambient temperature is much higher than the temperature inside the cylinder, so the liquefied natural gas will evaporate a little, resulting in a gradual increase in internal pressure. Therefore, when adding liquid, it is necessary to check the cylinder pressure first. Generally, the normal pressure of LNG cylinders is between 0.8Mpa and 1.0Mpa. If this pressure is exceeded, part of the gas needs to be discharged before it can be added. However, the discharge will not be wasted, the machine will be recycled, the recovery amount will be calculated, and the difference will be returned when the payment is made. However, the LNG filling speed is much faster than CNG, because the cylinder pressure is relatively low, and the liquefied natural gas is directly filled, which is similar to refueling.

Because LNG has one more step of cooling liquefaction operation, some impurities will be filtered out when cooling, so it is more pure. But liquefied processing also makes it more expensive and refueling stations are even rarer. So before 2008, buses were almost all CNG-based. In 2008, China began mass production of LNG heavy trucks, and LNG heavy trucks developed rapidly after 2010, at the same time, many cities began to equip a large number of LNG buses.

LNG bus cylinders are generally placed on the side of the body or the tail bin, and a small number of them are placed on the roof and the tail and the specific distribution is related to the layout of the carriage. For example, some buses have a row of seats in the middle facing the back door, and the subway seat layout is the same, these seats are basically under the gas cylinders.

The cylinders of CNG buses are generally on the roof, usually 5-6, covered with a long protective cover, and the characteristics are very obvious.

The truck is generally LNG based, carrying a bright cylinder behind the cockpit, the cylinder on the gas pipeline due to the evaporation of natural gas heat, often a layer of frost, the characteristics are obvious.

The truck is generally LNG based

Of course, there are some CNG trucks, the gas cylinder is also behind the cockpit, but its gas cylinders are in groups, the number is relatively large, the volume is large, and the outside has a protective cover.

See here you should understand the difference between CNG and LNG, later on, on the road to meet similar vehicles, presumably you can also tell at a glance is LGN or CNG.

Update cookies preferences
WhatsApp

Get a Quick Quote!

x

    Get a Quick Quote!

    x