Working principle and symbol identification of solenoid valves

How to identify the position and type of a solenoid valve
How to identify the position and type of a solenoid valve

How to identify the “several positions and several connections” of the solenoid valve?

  • Illustration description: Usually, the left figure represents the gas path state when the solenoid valve is powered off, and the right figure represents the gas path state when the solenoid valve is powered on.
  • “Number of Numbers”: Determined by the number of independent boxes in the graph, it represents the number of possible working positions of the valve core.
  •  “Several connections”: Check the number of interfaces on a single box. Each interface (including arrow line start/end points and truncation “T”) counts as one pass.
  • Arrow: Indicates the direction of air flow. Double-directional arrows indicate that gas can flow in both directions.
  • “T” shaped symbol: indicates that the path is cut off in this state.

 Examples of common types:

  • Two-position three-way: usually has 1 air inlet (P), 1 air outlet (A), and 1 exhaust port (R).
  • 2-position five-way: usually has 1 air inlet (P), 2 air outlets (A, B), and 2 exhaust ports (R, S).

Schematic diagram

 Interprevalve of solenoid valves nameplate parameters

  • DC24V 3.0W (or AC…): working voltage and coil power. For example, a DC 24V power supply; coil power consumption is 3 watts. AC stands for alternating current.
  • DC21.6V~26.4V: voltage allowed working range. In this example, the DC voltage can operate normally between 21.6V and 26.4V.
  • 100% ED: continuous power supply rate. Indicates that the coil allows 100% duty cycle (continuous energization) without damage.
  • IP65: Protection level. The first number “6” means complete dust protection; the second number “5” means protection from water spray.

Solenoid valve and manifold (valve island) installation guide

  • Key Tip: When installing the sealing gasket between the solenoid valve and the manifold, you must pay attention to the direction. The protruding part of the gasket should face downwards (refer to the diagram) to ensure the sealing effect and prevent air leakage.

Solenoid valve types and working principles

Single solenoid valve

Single solenoid valve

  • Structural features: A single electromagnetic coil with a return spring inside.
  • Working principle: When the power is turned on, the electromagnetic force drives the valve core to change direction; after the power is turned off, the spring force automatically resets the valve core to the initial state.
  • Main types: Normally closed (NC): When power is off, the air outlet is closed.
  • Normally open type (NO): When the power is off, the air outlet is open.
  • Typical applications: Commonly used in 3/2-way valves and some 5/2-way valves.
Double electronically controlled solenoid valves

Double electronically controlled

  • Structural features: It has two independent electromagnetic coils and no spring return.
  • Working principle: The coil on one side is energized to switch the valve core and maintain its position; the state remains unchanged after the power is turned off; the coil on the other side needs to be energized to make the valve core return. Has memory function.
  • Typical applications: Mainly used for two-position five-way and three-position five-way solenoid valves.
Three-position five-way solenoid valves

Three-position five-way solenoid valve

  • Control mode: driven by dual electronic control coils.
  • Working status: By controlling the power on and off of the left and right coils, the valve core can be stabilized in three different positions: left, middle, and right.
  • Function: By changing the connection relationship between the five air ports, the three states of the double-acting cylinder can be controlled: extension, retraction, and stopping (or exhausting) in the neutral position.
Update cookies preferences
WhatsApp

Get a Quick Quote!

x

    Get a Quick Quote!

    x